Original Xhorse V5.0.3 VVDI PROG Programmer
Latest Software Version: V5.0.3
Firmware Version: 2.0.0
Top 9 Reasons to Get VVDI Prog:
1. Built-in update software: Make VVDI Prog firmware update timely.
2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: possible causes of error will be listed
4. Reserve ports: For future update.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed
7.Newly Add Bosch ECU Adapter functions, Support Reading ISN from BMW ECU N20 N55 B38 B48
but need to buy VVDI Prog bosch ECU adapter.
8. Multi-language: English, French, Italian, Spanish, Arabic, Cezch, Polish, Portuguese, Russian, Turkish, Chinese
9. Get free ISN read function for BMW and NEC, MPC, Infineon etc chip continously update service
Please Note:
1.VVDI Prog Read ISN For BMW.If it supports to read ISN for BMW, after click read, it will show the ISN automatically like follow picture shows.
vvdi prog read isn for BMW
2.DO NOT click firmware upgrade in VVDI Prog software, its firmware is always 2.0 version, no need to update. Or it will get communication server error.
3.Please do wiring 100% same like the connection diagram in VVDIProg software, DO NOT lengthen the connection lines with other parts. Or will fail to read.
VVDI Programmer Function:
Support R&W lots of chips, include MC9S08 series, MC68HC(9)12series, MC9S12series, V850series, H8Xseries, R8Cseries, PCF79XXseries and most eeprom chips etc .
Support chip data verify, check blank function
Support data file compare function
Free Pin code calculation service by Dump for various models
Support R&W N20 For BMW, N55 ECU (show ISN directly)
Stable R&W MC9S12XE series chips (5M48H/1N35H/2M53J/3M25J etc.)
Support renew PCF79XX remote, currently support E/F series for BMW (Please Note PCF79XX adapter is optional)
Lots of connection diagram
Adapters Detailed Description:
16Pin Locking Socket
Function: Read EEPROM chips
Use method: Follow the image direction when insert the DIP chip (PIN1 as yellow point show as the picture); SOP chip need soldering on 16Pin adapter first, then insert the chip follow the image direction:
1.3.2 MCU Reflash Cable V3
Function: Read & Write MC68HC(9)12, V850, H8X, R5C series chips, current version is V3
Use method: Soldering the line on pin of chip before read & write
Notes:
(1) Please check all connection lines, ensure correct and reliable connection
(2) Please Don't lengthen CLK and GND-C line, may cause read data failed
1.3.3 ECU Reflash Cable
Function: Read & Write engine ECU
Use method: Connect the ECU and R&W
Notes:
Please check all connection lines, ensure correct and reliable connection
1.3.4 MC9S12 Reflash Cable V1
Function: Read & Write MC9S08, MC9S12 series chips, current version is V1
Use method: Soldering the line on pin of chip before read & write
Notes:
(1) Please check all connection lines, ensure correct and reliable connection
(2) Please Don't lengthen CLK and GND-C line, may cause read data failed
Note:Just as the software update at a high frequency,so that we cancel the CD in the package,sorry for this.But do not worry,we will send you the download link when you place an order,or you can contact me for the newest version,Hope you can understand that!
How To Update VVDI Prog Programmer Online?
This function require internet support
Click the "Upgrade" button enter the upgrade interface, show as following picture
Enter update interface, if software show "communication with server failed", please close your Anti-virus and computer firewall and retry. If software show "unable to find equipment", please reconnect device.
Tip information show the latest software version and upgrade information
Device information show the device SN, device firmware version and the latest firmware version
Firmware Upgrade Steps:
1. Select the firmware version
2. Click“Start Firmware Upgrade”button
3. Don't close or pull out USB cable before upgrade finished
Software Upgrade Steps:
1. Click“Software Link 1" or "Software Link 2" button, download software from the web
2. Extract the file
VVDI Prog Latest Update Information:
VVDI-Prog v5.0.3 (2021-05-28)
* This version DON’t need update firmware
+ Add FM3104,
FM3116,
FM3164,
FM31256,
options in
<1-EEPROM&FLASH>->
+ Add R5F11F_Data_8KB_Write,
R5F11FxJx_Flash_256KB_Write,
R5F11FxKx_Flash_384KB_Write,
R5F11FxLx_Flash_512KB_Write,
options in
<2-MCU>->
+ Add R5F11Wx7x_Flash_4KB_Write,
R5F11Wx8x_Flash_8KB_Write,
options in
<2-MCU>->
+ Add R5F11Yx7x_Flash_4KB_Write,
R5F11Yx8x_Flash_8KB_Write,
options in
<2-MCU>->
+ Add MPC5644B,
MPC5644C,
MPC5645B,
MPC5645C,
MPC5646B,
MPC5646C,
options in
<2-MCU>->
+ Add MPC5746G,
MPC5747C,
MPC5747G,
MPC5748C,
MPC5748G,
options in
<2-MCU>->
+ Add SPC564B64,
SPC564B70,
SPC564B74,
SPC56EC64,
SPC56EC70,
SPC56EC74,
options in
<2-MCU>->
+ Add MT22.1(MC9S12XET256)
option in <3-ECU>->
+ Add C-ADILLAC-CATSL
option in <7-AIRBAG->
+ Add CAMRY(R7F701A22)
option in <7-AIRBAG>->
+ Add BAOJUN510-PEPS(MC9S12XEG384),
BAOJUN560-ESCL(STM8AF6226)(2015),
BAOJUN560-PEPS(MC9S12XEG384)(2015)
options in <8-OTHER>->
+ Add HOWO-STRYKER-SECURED-DASHBOARD(19)
options in
<8-OTHER>->
+ Add MISTRA-47-PKE-MOUDLE(17)
options in
<8-OTHER>->
+ Add 70-CHIP-IMMO-MOUDLE
options in
<8-OTHER>->
VVDI Prog FAQs:
Q 1: my vvdiprog fell on the ground my worker didn't pay atention now i plug into usb the drivers in device manager are good but always say device error check usb driver i had installed on both laptops same problem so i dissasembled the device found out that the battery 3v inside was lose negative i soldered again but its the same.
A 1: If battery was removed, security data is gone. You need to send in for repair. There is nothing you can do on your own.
1. VVDI Prog device
2. EEPROM Socket
3. EEPROM Adapter
4. MC9S12 Reflash Cable V1
5. MCU Reflash Cable
6. ECU Reflash Cable
7. USB B-Tyte Cable
8.TB28FXXX Adapter (Optional,need to buy seperately)
9.PCF79XX Adapter (Optional,need to buy seperately)
10.New M35080/D80 Adapter (Optional,need to buy seperately)
11.New EWS3 Adapter (Optional,need to buy seperately)
12.New EEPROM CLIP Adapter (Optional,need to buy seperately)
13.New EWS4 Adapter (Optional,need to buy seperately)
Attention before puchasing, thank you!!
1)Pls make sure your current key/remote looks identical to the product pictured in the main image before purchasing
2)Our key need to be programmed and cutted by your local dealer and locksmith after puchasing
3)We will be responsible for the product quality but we do not offer programming service
USD
CNY